 









Wiring the Porch is optional and may use extra wiring materials (depending on your plan) |
DHTMLGoodies.com
2nd floor baserun - Don't do the front yet
WiringAssets/300_lg.jpg
DHTMLGoodies.com
This angle will come out close to the center of the Porch Beam
WiringAssets/302_lg.jpg
DHTMLGoodies.com
2 holes below the Base Line, offset from each other
WiringAssets/303_lg.jpg
DHTMLGoodies.com
Temporarily hold the tapewire in place - punch two holes
WiringAssets/305_lg.jpg
DHTMLGoodies.com
This is where we will connect to the tapewire
WiringAssets/306_lg.jpg
DHTMLGoodies.com
Two narrow slots for the wire between the holes
WiringAssets/307_lg.jpg
DHTMLGoodies.com
Don't make the slots deeper than they need to be
WiringAssets/308_lg.jpg
DHTMLGoodies.com
24 guage solid core wire (this is Radio Shack speaker wire)
WiringAssets/309_lg.jpg
DHTMLGoodies.com
About 3" long with the insulation stripped off
WiringAssets/310_lg.jpg
DHTMLGoodies.com
Feed the wires from the back through the tapewire
WiringAssets/312_lg.jpg
DHTMLGoodies.com
Gently hammer the surface so everything is flat
WiringAssets/320_lg.jpg
The rest of the porch wiring can wait
WiringAssets/000_lg.jpg
DHTMLGoodies.com
Link to slideshow 4: 2nd Floor Baserun, Ceiling Runs, Sconce Runs
Buttons/Next.png
|